XP SBC BC
Audio Connections
English
Option 2 (figure 4)
Connecting the FM transmitter to a line output of an audio source, e.g.
REC OUT, LINE OUT.
1Connect the 3.5 mm stereo plug of the stereo audio cable (15 cm) to the FM transmitter’s 3.5 mm audio input.
2Connect the 2 RCA plugs of the stereo audio cable to a line output (REC OUT or LINE OUT) of an audio source, e.g.TV, HiFi or PC:
–Check if the red RCA plug (right channel) is connected to the right channel (red) of the audio source.
–Check if the white RCA plug (left channel) is connected to the left channel (white) of the audio source.
3Switch on your audio source.The red power indication LED of the transmitter lights up if receiving an audio signal.
4Switch on the speaker.You may hear a hissing sound through the speaker if the speaker is not yet properly tuned to the transmitter.
5To tune, turn the tuning wheel until the signal is at its clearest.
6In case the line output of the audio source has an adjustable output level, adjust the line output level of the audio source to the highest acceptable undistorted level.
7Adjust the volume to the desired level with the speaker volume control.
Basic operation
When the FM transmitter is connected to a:
-line output of an audio source, such as REC OUT or LINE OUT or
-headphone output of an audio source.
1Switch on your audio source and carefully increase the volume of the audio source. The red power indication LED of the transmitter lights up if receiving an audio signal.
2Switch on the speaker.You may hear a hissing sound through the speaker if the speaker is not yet properly tuned to the transmitter.
3To tune, turn the tuning wheel until the signal is at its clearest.
4Adjust the volume to the desired level with the speaker volume control.
8
