Philips BDL4245E, BDL3245E, BDL4645E user manual Film mode, IR control, Keyboard control, Tiling

BDL3245E / BDL4245E / BDL4645E

Film mode

Choose to turn on or off the film mode frame conversion function.

•{Auto} - Enable the film mode frame conversion function for movies and motion pictures.The display converts a 24 frames-per- second (24 fps) input signal format to DVD video signal format. Once this function is enabled, it is recommended that you set the {Scan conversion} function to {Progressive}.

•{Off} - Disable the film mode frame conversion function.This mode is suitable for TV broadcasting and VCR signals.

IR control

Select the operation mode of the remote control when multiple displays are connected via the RS232C connection.

•{Normal} - All displays can be operated normally by the remote control unit.

•{Primary} - Designate this display as the primary display for remote control operation. Only this display can be operated by the remote control.

•{Secondary} - Designate this display as the secondary display.This display can not be operated by the remote control, and will only receive the control signal from the primary display via the RS232C connection.

•{Lock All} / {Lock all but Volume} / {Lock all but Power} - Lock the remote control function of this display.To unlock, press and hold the [DISPLAY] button on the remote control for 5 (five) seconds..

Keyboard control

Choose to enable or disable the display keyboard (control buttons) function.

•{Lock} - Disable the keyboard function.

•{Lock All} / {Lock all but Volume} / {Lock all but Power} - Disable

•the keyboard function.

Tiling

With this function you can create a single large-screen matrix (video wall) that consists of up to 25 sets of this display (up to 5-set each at the vertical and horizontal side).This function requires a daisy-chain connection.

Tiling

H monitors	1
V monitors	1
Position	1
Frame comp.	No
Enable	No
Switch on delay	Off

Example: 2 x 2 screen matrix (4 displays)

H monitors = 2 displays

V monitors = 2 displays

		H monitors		2
		1				Position
V monitors		3		4
Example: 5 x 5 screen matrix (25 displays)
	H monitors = 5 displays
	V monitors = 5 displays
			H monitors
	1	2	3	4	5	Position
monitors	6	7	8	9	10
	11	12	13	14	15
V	16	17	18	19	20
	21	22	23	24	25

•H monitors - Select the number of displays on the horizontal side.

•V monitors - Select the number of displays on the vertical side.

•Position - Select the position of this display in the screen matrix.

•Frame comp. - Choose to turn the frame compensation function on or off. If turned on, the display will adjust the image to compensate for the width of the display bezels in order to accurately display the

image.

20