Connections to External Equipment | Philips BDS4241R/00 guide

User Manual BDS4241R

4.CONNECTIONS TO EXTERNAL EQUIPMENT

4.1CONNECTING TO AN AERIAL

To view TV channels correctly, a signal must be received using an antenna. Connect the aerial or network input cable to the ANT jack on the rear of the PDP.

Note:

When installing or re-installing your PDP, be sure to use the supplied coaxial antenna cable. If you connect using a different coaxial cable, there is risk of noise or interference to the screen image.

(You must not use another general purpose cable. Use the 3M/5M/7M cable supplied by your dealer.)

•An outdoor aerial

•A cable TV network

4.2CONNECTING EXTERNAL EQUIPMENT (VCR, DVD, CAMCORDER, SATELLITE RECEIVER)

4.2.1USING SCART (AV) SOCKET INPUT

1Connect the SCART socket of the external device to the SCART socket of the PDP.

2Connect the video recorder to the antenna wall socket or cable box.

4.2.2USING S-VIDEO INPUT

1Connect the S-Video (4-pin DIN) connector of the external device to the S-VIDEO INPUT of the PDP.

2Connect the red (R) and white (L) audio jacks of the device to the R and L audio-in jacks located next to the S-VIDEO connector.

14

Image 14

Philips BDS4241R/00 manual Connections to External Equipment, Connecting to AN Aerial, Using S-VIDEO Input

Contents

Page Table of Contents Limited Warrantyeur Important Notes and Safety Instructions Safety InstructionsPage Know These Safety Symbols Cleaning & Care END-OF-LIFE Disposal Unpacking Unpacking and InstallationPackage Contents Installation Notes Parts and Functions Front View Rear View Remote Control General Functions Text Inserting the Batteries in the Remote ControlTeletext Function Buttons Connections to External Equipment Connecting to AN AerialUsing S-VIDEO Input Using Monitor Output Using Component Video InputUsing Video Input Using DVI Input External Audio Connection Connecting External Speaker How to Set up Your PC for Use with PDP Windows Connecting a PC Using RGB VGA or DVI Video InputSetting Up Your Display Using Plug and Play Using Front Panel or Remote Control Powering on / OFFSelecting Signal Source Basic Functions Mute Volume AdjustmentUsing Remote Control Via Remote Control Display Information Advanced Functions TV Channel Controls Storing TV Channels Automatically Storing TV Channels Manually Mono a Fine Tuning TV Channel Reception Labeling the TV Channels Choosing a MTS Multi-Channel Television Sound Mode Changing channels Editing TV ChannelsDeleting unwanted channels Picture Controls Adjusting Picture Settings Reset to the Factory Defaults Sound Controls Adjusting Sound Settings Treble Bass -Balance Power Save Mode OSD Menu Language Minimize Screen Sticking ON-SCREEN Display TimeoutAdjusting the Menu Transparency Freezing the Current Picture Changing the Screen Size Setting UP the PC InputAdjusting the PC screen automatically Auto Fill ALL Fill Aspect Zoom Anamorphic *WIDE Select a specific Teletext Accessing TeletextTeletext Display Teletext index Subtitles Normal PIP PBP Selecting a PIP modeViewing the Picture in Picture PIP Selecting a location of the sub-picture Swapping the audio of the main or sub-picture PIP SettingsRemote Management Selecting the main picture or the sub-picture Sdtv Resolution Input ModeVGA Resolution Hdtv ResolutionPage Technicals Specifications Display / Out Terminals External Speaker Option GeneralEnvironment Condition Internal Speaker Option Front Panel Cleaning Instructions Cleaning and TroubleshootingCleaning Cabinet Cleaning Instructions Troubleshooting Symptom Possible Cause Remedy What is EXCLUDED? Limited Warranty EURWhat is COVERED? Two Year Free Labor Two Year Free Parts Where is Service AVAILABLE? Remember