Basic Functions, Powering on / OFF | Philips BDS4241R/00 specs

User Manual BDS4241R

5.BASIC FUNCTIONS

5.1POWERING ON / OFF

Make sure the PDP is plugged into the wall outlet with the supplied power cord.

If the power is plugged in, the STATUS LED on the control panel will illuminate in red color.

Using Front Panel or Remote Control

1Press the MENU button on the front panel or remote control. => The PDP will now turn on after a brief pause.The STATUS LED

will now turn green to indicate power on status.

2 Turn off the power by pressing the POWER button on the front panel or the remote control again.

Main Input

TV

SCART 1

SCART 2

VIDEO

S-VIDEO

COMPONENT

RGB

DVI

Move [- CH +] Select [- VOL +] Exit [MENU]

5.2SELECTING SIGNAL SOURCE

Using Front Panel or Remote Control

1Press the MENU button on the front panel or remote control.

2Pressing the CH+ or CH- button will cycle the PDP through all available input signal sources in the following order:

TV - SCART 1 - SCART 2 - VIDEO - S-VIDEO -

COMPONENT - RGB - DVI

3Press the VOL+ or VOL- button to select the source.

18

Image 18

Philips BDS4241R/00 manual Basic Functions, Powering on / OFF, Selecting Signal Source, Using Front Panel or Remote Control

Contents

Page Table of Contents Limited Warrantyeur Important Notes and Safety Instructions Safety InstructionsPage Know These Safety Symbols Cleaning & Care END-OF-LIFE Disposal Unpacking and Installation Package ContentsUnpacking Installation Notes Parts and Functions Front View Rear View Remote Control General Functions Inserting the Batteries in the Remote Control Teletext Function ButtonsText Connecting to AN Aerial Using S-VIDEO InputConnections to External Equipment Using Monitor Output Using Component Video InputUsing Video Input Using DVI Input External Audio Connection Connecting External Speaker Connecting a PC Using RGB VGA or DVI Video Input Setting Up Your Display Using Plug and PlayHow to Set up Your PC for Use with PDP Windows Using Front Panel or Remote Control Powering on / OFFSelecting Signal Source Basic Functions Volume Adjustment Using Remote ControlMute Via Remote Control Display Information Advanced Functions TV Channel Controls Storing TV Channels Automatically Storing TV Channels Manually Mono a Fine Tuning TV Channel Reception Labeling the TV Channels Choosing a MTS Multi-Channel Television Sound Mode Editing TV Channels Deleting unwanted channelsChanging channels Picture Controls Adjusting Picture Settings Reset to the Factory Defaults Sound Controls Adjusting Sound Settings Treble Bass -Balance Power Save Mode OSD Menu Language Minimize Screen Sticking ON-SCREEN Display TimeoutAdjusting the Menu Transparency Freezing the Current Picture Changing the Screen Size Setting UP the PC InputAdjusting the PC screen automatically Auto Fill ALL Fill Aspect Zoom Anamorphic *WIDE Select a specific Teletext Accessing TeletextTeletext Display Teletext index Subtitles Normal PIP PBP Selecting a PIP modeViewing the Picture in Picture PIP Selecting a location of the sub-picture Swapping the audio of the main or sub-picture PIP SettingsRemote Management Selecting the main picture or the sub-picture Sdtv Resolution Input ModeVGA Resolution Hdtv ResolutionPage Technicals Specifications Display / Out Terminals External Speaker Option GeneralEnvironment Condition Internal Speaker Option Front Panel Cleaning Instructions Cleaning and TroubleshootingCleaning Cabinet Cleaning Instructions Troubleshooting Symptom Possible Cause Remedy What is EXCLUDED? Limited Warranty EURWhat is COVERED? Two Year Free Labor Two Year Free Parts Where is Service AVAILABLE? Remember