Using Component Video Input, Using Video Input | Philips BDS4241R

User Manual BDS4241R

4.2.3USING COMPONENT VIDEO INPUT

1Connect the green-colored (labeled as "Y") jack of the device to the green-colored "Y" jack of the PDP.

2Connect the red-colored (labeled as "Pr") jack of the device to the red-colored "PR/CR" jack of the PDP.

3Connect the blue-colored (labeled as "Pb") jack of the device to the blue-colored "PB/CB" jack of the PDP.

4Connect the red (R) and white (L) audio jacks of the device to the R and L audio-in jacks of the PDP.

4.2.4USING VIDEO INPUT

1Connect the jack of the external device to the VIDEO INPUT of the PDP.

2Connect the red (R) and white (L) audio jacks to the R and L audio-in jacks located next to the VIDEO connector.

4.2.5USING MONITOR OUTPUT

1Connect the jack of the DVD or VCR (for recording) or audio system to the MONITOR OUTPUT of the PDP.

2Connect the red (R) and white (L) audio jacks to the R and L audio-in jacks located next to the VIDEO connector.

4.2.6USING DVI INPUT

1Connect the DVI-jack of the DVD, decoder or satellite receiver to the DVI INPUT of the PDP.

2Connect the red (R) and white (L) audio jacks to the R and L audio jacks located next to the DVI connector.

15

Image 15

Philips BDS4241R/00 manual Using Component Video Input, Using Video Input, Using Monitor Output, Using DVI Input

Contents

Page Table of Contents Limited Warrantyeur Safety Instructions Important Notes and Safety InstructionsPage Know These Safety Symbols END-OF-LIFE Disposal Cleaning & Care Unpacking and Installation Package ContentsUnpacking Installation Notes Front View Parts and Functions Rear View Remote Control General Functions Inserting the Batteries in the Remote Control Teletext Function ButtonsText Connecting to AN Aerial Using S-VIDEO InputConnections to External Equipment Using DVI Input Using Component Video InputUsing Video Input Using Monitor Output External Audio Connection Connecting External Speaker Connecting a PC Using RGB VGA or DVI Video Input Setting Up Your Display Using Plug and PlayHow to Set up Your PC for Use with PDP Windows Basic Functions Powering on / OFFSelecting Signal Source Using Front Panel or Remote Control Volume Adjustment Using Remote ControlMute Display Information Via Remote Control TV Channel Controls Storing TV Channels Automatically Advanced Functions Mono a Storing TV Channels Manually Fine Tuning TV Channel Reception Labeling the TV Channels Choosing a MTS Multi-Channel Television Sound Mode Editing TV Channels Deleting unwanted channelsChanging channels Reset to the Factory Defaults Picture Controls Adjusting Picture Settings Treble Bass -Balance Sound Controls Adjusting Sound Settings OSD Menu Language Power Save Mode Freezing the Current Picture ON-SCREEN Display TimeoutAdjusting the Menu Transparency Minimize Screen Sticking Auto Fill ALL Fill Aspect Zoom Anamorphic *WIDE Setting UP the PC InputAdjusting the PC screen automatically Changing the Screen Size Display Teletext index Accessing TeletextTeletext Select a specific Teletext Subtitles Selecting a location of the sub-picture Selecting a PIP modeViewing the Picture in Picture PIP Normal PIP PBP Selecting the main picture or the sub-picture PIP SettingsRemote Management Swapping the audio of the main or sub-picture Hdtv Resolution Input ModeVGA Resolution Sdtv ResolutionPage Display Technicals Specifications / Out Terminals Internal Speaker Option GeneralEnvironment Condition External Speaker Option Cabinet Cleaning Instructions Cleaning and TroubleshootingCleaning Front Panel Cleaning Instructions Symptom Possible Cause Remedy Troubleshooting Two Year Free Labor Two Year Free Parts Limited Warranty EURWhat is COVERED? What is EXCLUDED? Where is Service AVAILABLE? Remember