Rerecording (Tape Duplication) 31

AUDIO and VIDEO OUT Jacks on source unit

CCC130

(VCR or Camcorder)

 

AUDIO VIDEO

STOP R

EARPHONE

EJECT

 

VIDEO AUDIO OUT

IN

Audio Cable from

AUDIO OUT to AUDIO In

Video Cable from

AUDIO and VIDEO In

VIDEO OUT to VIDEO In

Jacks on TV/VCR

1

Make the connections shown above, using audio and video cables (not supplied). Connect the source unit (VCR or camcorder) to a power source after connections are made.

2

The source unit will play your tape. Insert a prerecorded tape in the source unit. If playback begins, press the STOP button on the unit.

3

The TV/VCR will record your tape. Insert a blank tape in the TV/VCR. Make sure the tape’s record tab is intact. The TV/VCR power will turn on automatically.

4

Point the TV/VCR remote control at the TV/VCR. Press

Number buttons 0, 0 so that A/V IN appears on the screen.

The TV/VCR is now in Line Input mode.

5

Point the TV/VCR remote control at the TV/VCR. Press the SPEED button until the desired tape speed (SP or SLP) appears on the screen.

6

Press the PLAY button on the source unit and the REC(ord)/OTR button on your TV/VCR at the same time. Copying will begin.

7

To stop copying, press the STOP/EJECT button on the TV/VCR, then stop the tape on the source unit (VCR or camcorder).

Helpful Hints

Unauthorized recording of copyright- ed television programs, video tapes, or other materials may infringe on the rights of copyright owners and violate copyright laws.

Different brands of equipment may operate differently.

Make sure all connections are secure. Otherwise, you may not record both picture and sound.

Programs that are copyright protected may not record clearly.

Page 31
Image 31
Philips CCC 132AT, CCC192AT, CCC 130AT, CCC 190AT owner manual Rerecording Tape Duplication, TV/VCR is now in Line Input mode