Philips CCC192AT, CCC 130AT Timer Recording, Daily, Select Program Number To END Press Exit

32 Timer Recording

Follow the steps below to program the TV/VCR to record TV programs while you’re away from home. The TV/VCR will turn itself on, record, and turn itself off automatically. Before you begin, make sure:

●The clock is set. If not, CLOCK MUST BE SET appears, fol- lowed by the SET CLOCK menu. Details are on pages 12-17.

●Channels are set. Details are on page 10.

●A tape is in the TV/VCR. Make sure the tape’s record tab is intact and the tape is long enough to record the program.

Complete each step within 60 seconds of completing the previous step. If you don’t, you may start again at step 1.

1

Press the MENU button.

>	PRIM. SETUP	PRESS B
	VCR PROGRAM
	VCR SETUP
	CAPTION
	REMINDER
	BRIGHTNESS

2

Press the PLAY/▲ button or the STOP/▼ button to select VCR PROGRAM, then press the F.FWD/B button.

VCR PROGRAM

>ONCE DAILY(MON-FRI)

WEEKLY PROGRAM REVIEW

SELECT KL CHOOSE B

TO END PRESS EXIT

3

Press the PLAY/▲ button or the STOP/▼ button to select a ONCE, DAILY, OR WEEKLY recording. Then, press the F.FWD/B button.

●ONCE: The TV/VCR will record a TV program on any day you choose, up to 12 months away.

●DAILY: The TV/VCR will record every day from Monday to Friday – starting at the same time and recording the same channel for the same length of time.

●WEEKLY: The TV/VCR will record the same channel on the same day, at the same time, and for the same length of time every week.

Daily	DAILY PROGRAM (MON-FRI)
	PROGRAM -1 2 3 4 5 6 7 8-

Recording (example)

SELECT PROGRAM NUMBER

TO END PRESS EXIT

2-3

EJECT

POWER

1	MENU	STATUS/EXIT	CLEAR
	1	2	3
	4	5	6
	7	8	9
	SLEEP/		ALT.CH
	WAKE UP	0
	REC		PAUSE
	/OTR		/STILL

PLAY

REW F.FWD

STOP

CH.VOL.

MUTE

SPEED

TRACKING MEMORY

Helpful Hints

•With ShowGuard, you don’t have to worry about losing your timer recordings. If the power fails, timer recordings will be restored when the clock is reset. (The clock will reset itself automatically if you are using AUTO CLOCK. Details are on pages 14-17. If you are not using AUTO CLOCK, reset the clock manually. Details are on pages 12-13.) The timer recording will not occur only if it was scheduled to take place dur- ing the power failure.

•You cannot set a timer recording if DEFEAT RECORDING is ON. Details are on page 36.