Glossary 53

AUDIO In Jack: jack on the front of the TV/VCR which is used to record audio from another source.

Automatic Channel Setup: process in which the TV/VCR memorizes all available channels. Then, when you push the CH(annel) o/p buttons, you only scan through channels you receive.

Bands: settings that allow you to tune channels.

Antenna – VHF (very high frequency; channels 2-13) and UHF (ultra high frequency; channels 14-69).

Cable – all standard channels can be received without a Cable Box.

Brightness: adjusting increases or decreases the brightness of the color on the screen.

Color: adjusting pales or brightens the TV/VCR color.

Dubbing: copying a tape using a VCR.

HQ: high quality; a feature in the TV/VCR circuitry which pro- vides enhanced picture detail.

Line Input: The channel to which you set your TV/VCR during dubbing. The line input channel is always channel 00 (A/V IN).

Mode: a TV/VCR operation.

OTR: One-Touch Recording; a timed recording that starts immediately and records for 30 minutes to eight hours, whichev- er you specify.

Picture: adjusting increases or decreases the contrast of the pic- ture on the screen.

Sharpness: adjusting softens or clarifies the picture on the screen.

Tape Speeds: how fast the tape travels during playback or recording.

SP (standard play) – fastest tape speed (recording time for a T120 tape is approximately two hours); best picture quality.

LP (long play) – average tape speed; playback only.

SLP (super long play) – slowest tape speed (recording time for a T120 tape is approximately six hours).

Tint: adjusting changes the tints of the picture on the TV/VCR from purple to green.

VIDEO In Jack: jack on the front of the TV/VCR which is used to record video from another source.

Page 53
Image 53
Philips CCC 130AT, CCC192AT, CCC 190AT, CCC 132AT owner manual Glossary