Hooking Up the TV/VCR (cont’d) 7

D.

Hooking Up Your TV/VCR to Another Video Source (VCR or Camcorder)

You may need this connection if you want to copy tapes or view tapes that you are playing on the VCR or camcorder. Select channel 00 (A/V IN) at the TV/VCR when viewing tapes that are playing on the VCR or camcorder. Details are on page 31.

AUDIO/VIDEO OUT Jacks on VCR

3CH IN 4CH

AUDIO VIDEO

OUT ANT.

INOUT

Connect an Audio cable to the AUDIO OUT Jack on the VCR and to the AUDIO In Jack on the front of the TV/VCR.

AUDIO VIDEO

3CH

IN

4CH

 

AUDIO VIDEO

ANT.

OUT

INOUT

CCC130

AUDIO/VIDEO In Jacks on front of TV/VCR

Connect a Video cable to the VIDEO OUT Jack on the

VCR and to the VIDEO In Jack on the front of the TV/VCR.

2

When all other connections are complete, plug in the TV/VCR’s power cord.

3

Before you turn on the TV/VCR, go to page eight.

Helpful Hints

Before connecting an antenna or cable signal to the ANT(enna) Jack, make sure the pin is not bent. If the pin is bent, straighten it as illustrated, then connect the antenna or cable signal to the ANT(enna) Jack.

A rod antenna (not supplied) is available from Philips Service Solutions Group. The part number is 4835 303 37006. To order, call 1-800-851-8885. (This antenna will fit the CCC130 and CCC132 only.)

Audio and video cables are not supplied.

 

Bent pin

Crooked Pin

Straight Pin

Cable

Plug

Page 7
Image 7
Philips CCC 132AT, CCC192AT, CCC 130AT Hooking Up the TV/VCR cont’d, Bent pin, Crooked Pin Straight Pin, Cable Plug