Philips CCC 132AT, CCC192AT, CCC 130AT, CCC 190AT With the TV/VCR on, press the Menu button

	Timer Recording (cont’d) 35
Checking or Clearing Timer Recordings	5 2-4
1

With the TV/VCR on, press the MENU button.

2	1	EJECT	POWER
		MENU	STATUS/EXIT	CLEAR
Press the PLAY/▲ button or the STOP/▼ button to select
VCR PROGRAM, then press the F.FWD/B button.		1	2	3
3		4	5	6
		7	8	9
Press the PLAY/▲ button or the STOP/▼ button to select		SLEEP/		ALT.CH
PROGRAM REVIEW, then press the F.FWD/B button.		WAKE UP	0
The timer recording information for the program in the lowest		REC		PAUSE
numbered position will appear on the screen. If no timer record-		/OTR		/STILL
			PLAY
ings are programmed, nothing will happen when you select PRO-		REW	F.FWD

GRAM REVIEW and press the F.FWD/B button.

4

Press the F.FWD/B button to display information about the next timer recording. (If you do not press a button within 10 sec- onds, information about the next timer recording will appear auto- matically.) This will continue until all positions have been displayed. Then, the menu will disappear. You can exit the Program Review at any time by pressing the STATUS/EXIT button.

STOP

CH.VOL.

MUTE

SPEED

TRACKING MEMORY

5

To cancel the timer recording displayed, press the CLEAR button. Either the display will disappear or information about other timer recordings will appear. If you do not press any other buttons, the display will disappear after all timer recordings have been displayed.

6

Repeat steps 1-4 to make sure you cleared the correct recording.

Helpful Hint

• With ShowGuard, you don’t have to worry about losing your timer recordings. If the power fails, timer recordings will be restored when the clock is reset. (The clock will reset itself automatically if you are using AUTO CLOCK. Details are on pages 14-17. If you are not using AUTO CLOCK, reset the clock manually. Details are on pages 12-13.) The timer recording will not occur only if it was scheduled to take place during the power failure.