![](/images/new-backgrounds/1231710/23171063x1.webp)
32 Timer Recording
Follow the steps below to program the TV/VCR to record TV programs while you’re away from home. You can program up to eight timer recordings. For each one, the TV/VCR will turn itself on, record, and turn itself off automatically. Before you begin make sure:
●The clock has been set. If not, CLOCK MUST BE SET appears.
●Channels are programmed.
●There is a tape in the TV/VCR (make sure the tape’s record tab is intact and the tape is long enough to record the program).
Complete each step within 60 seconds of completing the previous step. If you don’t, you may start again at step 1.
1
Press the MENU button to display the pop up menu.
| PRIM. SETUP |
|
|
B VCR PROGRAM |
| PRESS + | |
| VCR SETUP |
|
|
| CAPTION |
|
|
| REMINDER |
|
|
| BRIGHTNESS |
|
|
2
Press the PLAY/▲ button or the STOP/▼ button to select
VCR PROGRAM, then press the F.FWD/+ button.
VCR PROGRAM
1ONCE
2DAILY (MON - FRI)
3WEEKLY
4PROGRAM REVIEW
TO SELECT PRESS NUMBER
TO END PRESS EXIT
3
Select a once, daily, or weekly recording.
●Press the Number 1 button to select ONCE. The TV/VCR will record a TV program on any day you choose, up to 12 months away.
●Press the Number 2 button to select DAILY. The TV/VCR will record from Monday through Friday – starting at the same time and recording for the same length of time every day.
●Press the Number 3 button to select WEEKLY. The TV/VCR will record on the same day, at the same time, and for the same length of time every week.
3 | POWER |
|
| SLEEP |
| 2 | 3 | ALT.CH | |
1 |
| |||
| 4 | 5 | 6 | o |
|
|
|
| CHANNEL |
| 7 | 8 | 9 | p |
2 |
| 0 | +100 | o |
SPEED |
| MUTE | VOLUME | |
|
|
| p | |
| o |
| ||
| PLAY |
| ||
– REW |
| F.FWD + | ||
|
| STOP |
| |
|
| p |
| |
1 | REC/OTR | MEMORY | PAUSE/STILL | |
|
|
| o | |
MENU | STATUS/EXIT | CLEAR | TRACKING | |
|
| |||
|
|
|
| p |
Helpful Hints
•If the power fails, programmed timer recordings will not be lost. The programmed timer recordings will be restored when the clock is reset after the power failure. (The clock will reset itself automatically if you are using the AUTO CLOCK feature. Details are on pages 14 - 17. If you are not using the AUTO CLOCK feature, reset the clock manually; then, the timer recordings will be restored. Details are on pages 12 - 13.) The timer recording will not occur only if the timer recording was scheduled to take place during the power failure.
•You cannot set a timer recording if the TV/VCR is in Record Defeat mode. To set the Record Defeat mode to OFF, see page 36.