Philips CCX252AT warranty Real Time Counter Memory, Appear on-screen

44 Real Time Counter Memory

Follow the steps below to reset the real time counter to zero at a tape location you want to refer to later.

1

Play, fast forward, or rewind a tape to the location that you would like to refer to later. Stop the tape.

2

Press the STATUS/EXIT button. The real time counter will

appear on-screen.

01:08 PM	STOP
CH10

SLP 1 : 23 : 45

3

While the counter remains on-screen, press the CLEAR button to reset the real time counter to zero.

0 : 00 : 00

4

While the counter remains on-screen, press the MEMO- RY button so that M appears on-screen. To erase a real time counter memory, press the MEMORY button so that the M disappears from the screen.

4

2

POWER			SLEEP
	2	3	ALT.CH
1
4	5	6	o
			CHANNEL
7	8	9	p
	0	+100	o
SPEED		MUTE	VOLUME
			p
	o
	PLAY
– REW			F.FWD +
	STOP
	p
REC/OTR	MEMORY	PAUSE/STILL
			o
MENU	STATUS/EXIT	CLEAR	TRACKING

p

5

1

3

M 0 : 00 : 00

5

To return to the previous point at which the real time counter was reset to zero, when in Stop mode, press the REW(ind)/– button. To return to the future point at which the time counter was reset to zero, when in Stop mode, press the F.FWD/+ button. Wait for the tape to stop, then press the PLAY/▲ button to watch the tape.

Helpful Hints

•The real time counter memory will not function during Repeat Play mode. Details are on page 41.

•You may only set one real time counter memory at a time. If you try to set the real time counter to zero at a second location, the previ- ous real time counter to zero setting will be lost.