![](/images/new-backgrounds/1231710/23171013x1.webp)
Hooking Up the TV/VCR (cont’d) 7
D.
Hooking Up Your TV/VCR to Another Video Source (VCR or Camcorder)
You may need this connection if you want to copy tapes. Details are on page 31.
AUDIO/VIDEO OUT
Jacks on VCR
Use an Audio cable to connect the AUDIO OUT Jack on the VCR to the AUDIO (In) Jack on the front of the TV/VCR.
3CH IN 4CH
AUDIO VIDEO
OUT ANT.
INOUT
AUDIO VIDEO
3CH | IN | |
4CH | ||
| ||
AUDIO VIDEO | ANT. | |
OUT |
INOUT
AUDIO/VIDEO Jacks on front of TV/VCR
Use a Video cable to connect the VIDEO OUT Jack on the VCR to the VIDEO (In) Jack on the front of the
2
Plug in the TV/VCR.
3
Before you turn on the TV/VCR, go to page eight.
Helpful Hints
•Before connecting the rod antenna or coaxial cable to the ANT(enna) Jack, make sure the pin is not bent. If the pin is bent, straighten it as illustrated, then connect it to the ANT(enna) Jack.
•A rod antenna (not supplied) is available from Philips Service Company. The part number is 4835 303 37006. To order, call
•Audio and video cables are not supplied.
Crooked Pin | Straight Pin |