Philips CCX252AT warranty Timer Recording cont’d

34 Timer Recording (cont’d)

8

Press the Number 1 button to record in SP speed, press the Number 2 button to record in LP speed, or press the Number 3 button to record in SLP speed. Details about tape speed are on page 29. You cannot use the (Tape) SPEED button at this time.

ONE TIME PROGRAM

PROGRAM	1
CHANNEL	10
TIME ON	09:30 PM
TIME OFF	11:00 PM
REC SPEED	SLP

SP=1 LP=2 SLP=3

TO CORRECT PRESS CLEAR

TO END PRESS EXIT

9

Press two Number buttons for the month and two Number buttons for the day you want the program to record. For example, for July 10, 1997, press 07, 10. The day of the week and the year will be displayed automatically (you cannot program the TV/VCR to record more than one year in advance).

ONE TIME PROGRAM

PROGRAM	1
CHANNEL	10
TIME ON	09:30 PM
TIME OFF	11:00 PM
REC SPEED	SLP
START DATE	07/10/97
	THURSDAY

TO CORRECT PRESS CLEAR

TO END PRESS EXIT

11 8

POWER SLEEP

9		2	3	ALT.CH
	1
	4	5	6	o
	7	8	9	CHANNEL
				p
		0	+100	o
	SPEED		MUTE	VOLUME
				p
		o
		PLAY
	– REW			F.FWD +
		STOP
		p
	REC/OTR	MEMORY	PAUSE/STILL
				o
	MENU	STATUS/EXIT	CLEAR	TRACKING

p

10

10

Press the STATUS/EXIT button. PROGRAM WAS COM- PLETED / PLEASE TURN OFF FOR TIMER RECORDING will appear on-screen.

●If there is not a tape in the TV/VCR, PLEASE INSERT CAS- SETTE also appears on-screen.

●If there is a tape without a record tab in the TV/VCR, PLEASE REMOVE CASSETTE also appears on-screen. If this happens, insert a different tape.

●If PROGRAM NOT COMPLETED appears, start again at step 1. In five seconds the on-screen message will disappear.

11

Turn off the TV/VCR power. The REC(ord) light will flash. If you forget to turn off the TV/VCR, PLEASE TURN OFF FOR TIMER RECORDING appears on the TV/VCR screen two minutes before a timer recording starts.

The TV/VCR must be off for a timer

recording to take place!

Make sure there is a tape in the TV/VCR.

Helpful Hints

•PROGRAM NOT COMPLETED / CLASH may appear on-screen when you finish setting a timer recording. This means that the timer recording you just programmed and another timer recording overlap, and thus the current timer recording will not be carried out.

•To stop a started timer recording, press the STOP/EJECT button on the TV/VCR.

Please see page 48 for more Helpful Hints.