4-2

DISMANTLING INSTRUCTIONS

Dismantling the Tray Covers

continued

picture 7

•To release the cover from the catch on the tray, pull it frontwards on bottom side as shown in picture 7 and 8.

•Pull the cover up.

Dismantling the ornamental cover

from the CDR-tray

functions in the same manner.

picture 8

Dismantling the Front Cabinet

picture 9

•Remove top cover and ornamental covers from the trays first → see description above and on page 4-1.

•Move trays back to closed position.

•Loosen 2 screws as shown in picture 9.

•Remove adhesive tape from cable 8016 and take cable to Headphone Board out of its guidings on the right side of the CDR support.

•Release 4 catches on top (as shown in picture 9) first, then 2 catches on bottom (see picture 10).