•Remove 7 (9) screws as shown in picture 2.
•Raise top cover at the rear and pull it backwards.
remark: in some production batches the top cover may be fixed with 5 screws at the rear side.
picture 2
Dismantling the Tray CoversTo dismantle the ornamental cover, the tray has to be moved out first. This can either be done by activating the
In order to avoid unnecessary loading it is recommended to move the tray out manually a few centimetres. To release the tray manually proceed as shown in pictures 3, 4, 5 and 6. The tray will move out a little. Afterwards it can be pulled out as far as convenient.
Release tray of CD Loader | Release tray of CDR module |
picture 5
picture 3
or
detail
use a short screwdriver or a paper clip
picture 4 | picture 6 |