PLAYING iPod USING DC200
1Remove the top cover of dock.
2Snap the compatible iPod into the dock connector.
3Press SOURCE repeatedly to switch on the iPod mode.
•Make sure that you have powered on Apple iPod before selecting iPod source. ™ On the DC200’s display, “iPod” is displayed when iPod is connected.
4The connected iPod player will play automatically.
Notes:
–By using the buttons ( 2;, ¡1, 2 ™ and VOLUME ) on the DC200, the following playback features are available: Play/Pause, selecting next/previous track, fast for- warding/rewinding and changing volume.
–The buttons ( 2;, ¡1, 2 ™ and VOLUME ) on the DC200 can work only with playback of the audio contents stored on the docked player.
–To navigate the iPod menu, you may use iPod MENU, 3 4 and OK buttons on the set.
–When you press iPod MENU in iPod mode, 1 2 3 4 and OK buttons first per- form the navigation function, and then restore the original functions.
–For iPod operations and features, refer to the user manual of your iPod player.
–This set does not support iPod video output.
Using USB connectivity
•DC200 is fitted with a USB port on the top panel, offering a plug and play feature which allows you to play, from your DC200, digital music and audio contents stored on a USB mass storage device.
•Using a USB mass storage device, you can also enjoy all the features offered by DC200.
Compatible USB mass storage devices:
With the DC200, you can use
–USB flash memory (USB 2.0 or USB 1.1)
–USB flash player (USB 2.0 or USB 1.1)
•USB device which requires driver installation under Windows XP is not supported.
