Philips DC200/79 Using The Alarm General, SETTING THE ALARM TIME AND MODE See, Helpful hints

USING THE ALARM

GENERAL

Two different alarm times can be set. This can be useful when you need to be woken up at a different time e.g. during the week and at the weekend, and you can set different wake-up modes:

•Tuner mode.

•iPod/USB mode.

•Nature sound mode.

•Buzzer mode. The gentle wake buzzer alarm increases its beep tone frequency within seconds.

SETTING THE ALARM TIME AND MODE (See 3)

1In any mode, press and hold 1 ALM or 2 ALM for two seconds.

™AL1 / AL2 icon and the hour digits flash.

2Hold down or press ¡1 / 2™ repeatedly to set and adjust the hours.

3Press 1 ALM or 2 ALM to confirm.

™AL1 / AL2 icon and the minutes digits flash.

4Hold down or press ¡1 / 2™ repeatedly to set and adjust the mintues.

5Press 1 ALM or 2 ALM to confirm.

™The icon for the current alarm mode flashes.

6Press ¡1 2™ / SOURCE repeatedly to select your desired alarm mode.

•For Nature sound mode, press ALBUM/PRESET -/+1 / 2 to select your desired nature sound track.

™At the set alarm time, the selected sound source or buzzer will switch on automatically.

Helpful hints:

–If you have selected TUNER alarm mode, make sure you have properly tuned to a station before turning off the set.

–If you have selected iPod/USB alarm mode, make sure you have connected the com- patible iPod player or USB device, or the buzzer mode will be selected automatically.

–To check the alarm time setting for AL1 or AL2, press 1 ALM or 2 ALM.