Philips DC200/79 user manual Connecting An External Device, Maintenance & Safety

Helpful hints: In standby mode, you can press SLEEP to switch on the set and directly set the sleep function.

CONNECTING AN EXTERNAL DEVICE

You can listen to the sound of the connected external device through your DC200’s speakers.

1Press SOURCE repeatedly to select AUX mode.

2Use the supplied AUX-IN cable to connect DC200’s AUX IN jack to an AUDIO OUT or headphone jack on an external equipment (such as CD player, or VCR).

MAINTENANCE & SAFETY

•Install the unit near the AC outlet and where the AC power plug can be easily reached.

•Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.

•The apparatus shall not be exposed to dripping or splashing.

•Do not expose the set to humidity, rain, sand or excessive heat caused by heating equipment or direct sunlight.

•To clean your set, use a soft damp cloth or chamois leather. Do not use clean- ing products, which contain benzene, thinner, etc. as these may harm the housing.