Philips DC200/79 user manual Tuner, Tuning To Radio Stations, To improve reception FM

5Press PROG/SET TIME to confirm.

6In clock mode, press ALBUM/PRESET -/+1 /2 to set your time zone.

7To zoom in/out the clock display, press MODE in clock mode.

TUNER

1Press SOURCE repeatedly to switch on the radio (FM only).

™Display shows the radio frequency of the last selected waveband. Your pre- set station is also shown if you are listening to a preset. (See 2)

2Adjust the sound using VOLUME 3 /4.

3To select preset stations, press ALBUM/PRESET -/+1 /2 once or repeatedly.

TUNING TO RADIO STATIONS

1Press and hold ¡1 / 2™ until the frequency in the display starts changing.

™After the system tunes to a station of sufficient reception, display shows its frequency.

• To tune to a weak station, press ¡1 / 2 ™ briefly and repeatedly until an optimal reception is found.

To improve reception (FM):

Extend and position the pigtail fully to obtain optimum reception.

STORING AND USING PRESET STATIONS

You can store up to 20 FM radio stations in the memory.

1Tune to your desired station (see TUNING TO RADIO STATIONS).

2Press PROG to activate the programming, and then press ALBUM/PRESET -/+1 / 2 to select a desired preset number.

3Press PROG again to confirm.

4Press ALBUM/PRESET -/+1 / 2 to listen to a preset station.

AUTOSTORE: Automatic programming

1Press and hold PROG for more than two seconds.

™Available radio stations will be automatically stored.