Philips DC200/79 Programing Track Numbers, Sleep, Setting and switching off SLEEP, Power

PROGRAMING TRACK NUMBERS

1Press 9 to stop the playback.

2Press PROG to enter the programming mode.

™The current album number flashes.

3Press ¡1 / 2™ to select a desired album number.

4Press PROG to confirm.

™The current track number flashes.

5Press ¡1 / 2™ to select a desired track number.

6Press PROG to confirm.

7Repeat steps 3-6 to select and store all desired tracks.

8To start playback of your programme, press 2;.

Helpful hints:

–Up to 999 playable audio files stored on a USB mass storage device can be played on DC200.

–Up to 99 playable albums stored on a USB mass storage device can be select- ed and displayed on DC200.

–Make sure that file names of MP3 files end with .mp3. and the file names of WMA files end with .wma.

–For DRM protected WMA files, use Windows Media Player 10 (or later) for conversion. Visit www.microsoft.com for details about Windows Media Player and WM DRM (Windows Media Digital Rights Management).

–For USB device playing, if the display shows "OL", it means that the USB device is electrically overloading DC200. You need to change a USB device.

SLEEP

This set has a built-in sleep timer, which enables the radio to be automatically switched off after a preset period of time.

Setting and switching off SLEEP

1Set your timer by pressing SLEEP repeatedly until the desired timer option appears. ™ Selections are follows (time in minute):

120=90=60=30=15=OFF=120

2The set will turn off automatically at the selected time.

3To cancel sleep, press either:

–POWER

–SLEEP once or more until OFF appears on the display.