8 Other features
Set the alarm timer
You can set two alarms which go off at different time.
1Ensure that you have set the clock correctly. (see ‘Set clock and date’ on page 13)
2Press and hold ALM 1 or ALM 2 on the main unit for 2 seconds.
»Hour digits blink.
»[AL 1] (alarm 1) or [AL 2] (alarm 2) is displayed.
3Press 
/
repeatedly to set the hour.
4Press ALM 1 or ALM 2 to confirm.
5Press 
/
repeatedly to set the minute.
6Press ALM 1 or ALM 2 to confirm.
• To set the other alarm, repeat the steps 2 - 6.
Tip
•To view alarm time, press ALM 1 or ALM 2 repeatedly until alarm time is displayed.
Set alarm mode
1Adjust the
»When the alarm time comes, the selected Phone/iPod, or radio or buzzer turns on.
Tip
•If iPod/iPhone source is selected but no iPod/iPhone is loaded, the buzzer is selected automatically.
Activate the alarm timer
1Press repeatedly ALM 1 or ALM 2 on the main unit to activate or deactivate the timer.
»If the timer is activated, [AL 1] (alarm 1) or [AL 2] (alarm 2) is displayed.
»If the timer is deactivated, [AL 1] (alarm 1) or [AL 2] (alarm 2) disappears.
Turn off the alarm tone
During an alarm tone, you can select one of the following to turn it off.
E n g l i s h
EN 21
