Press POWER.

»The alarm timer remains activated.

Press REPEAT ALARM on the main unit.

»The alarm call repeats at 9-minute intervals.

Press ALM 1 or ALM 2 on the main unit.

»[AL 1] (alarm 1) or [AL 2] (alarm 2) disappears from the display.

»The alarm timer is deactivated.

Set the sleep timer

This DC350 can switch to standby automatically after a set period of time.

1When the DC350 is turned on, press SLEEP repeatedly to select a set period of time (in minutes).

» When sleep timer is activated, the display shows .

To deactivate sleep timer

1Press SLEEP repeatedly until “0” is displayed.

» When sleep timer is deactivated, disappears on the display.

Adjust display brightness

1Press repeatedly BRIGHTNESS CONTROL on the main unit to select:

Bright.

Dim.

Off.

9 Product information

Note

Product information is subject to change without prior notice.

Specifications

Amplifier

Rated Output Power

2X3W RMS

Frequency Response

125Hz - 16kHz, ±3dB

Signal to Noise Ratio

>65dB

Aux Input

0.6 V RMS 10kohm

22EN

Page 21
Image 21
Philips DC350 user manual Product information, Set the sleep timer, Adjust display brightness, Specifications, Amplifier