Philips DCB146 user manual Adjusting volume and sound, Switching the system on

	Basic Functions
	Adjusting volume and sound
	1 Press VOL +/- to adjust volume.
	➜ Display shows the volume level: VOL and a
	number from 01-32.
	2 Press DBB on the remote control to switch
	bass enhancement on or off.
	➜ Display shows:	if the DBB is activated.
	3 Press MUTE on the remote
	control to interrupt sound
	reproduction instantly.
	➜ Playback will continue
	without sound.
	● To activate sound reproduction
	you can:
	– press MUTE again;
IMPORTANT:	– adjust the volume controls;
	– change source.
Before you operate the system, complete
the preparation procedures.

Switching the system on

●Press STANDBY-ON 2 or SOURCE (or

2 on the remote control).

➜The system will switch to the last selected source.

●Press DISC, TUNER/DAB, iPod or AUX on the remote control.

➜The system will switch to the selected source.

To switch the system to standby mode

●Press STANDBY-ON2 (or 2 on the remote control).

To switch the system to Eco-power standby mode

●Press and hold STANDBY-ON2 (or 2 on the remote control) for more than 2 seconds. ➜ The backlight for clock display is dim.

Power-saving automatic standby

The power-saving feature automatically switches to standby 15 minutes after a CD playback has ended and no control is operated.

Note:

–In the Eco power standby, no button, except SOURCE and STANDBY-ONbuttons, can be activated.

English

11