1 Open the battery compartment.
2 Insert 2 AAA batteries with correct polarity
3 Close the battery compartment.
Note
•• If you are not going to use the remote control for a long time, remove the batteries.
•• Do not use old and new or different types of batteries in combination.
•• Batteries contain chemical substances, so dispose of them properly.
4 Get started
Caution
•• Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in sequence.
Turn on
Press 
.
»»This product switches to the last selected source.
Switch modes
Automatically switch the modes:
•After this product keeps inactive for 15 minutes, it automatically switches to the normal standby mode.
•After this product keeps in the normal standby mode for 15 minutes, it automatically switches to the eco power standby mode.
Manually switch the modes:
•Press and hold 
to switch this product:
•from the working mode or normal standby mode to the eco power standby mode.
•from the eco power standby mode to the normal standby mode.
•Press 
to switch this product
•between the working mode and a standby mode.
Note
•• When an iPod/iPhone/iPad is connected, this product does not switch to the
EN 9
