3 Before use | to |
| • Insert the red wires to "+", black wires |
| 3 Release the socket flap. |
Place the product |
|
Place the speakers at an angle of approximately 45 degrees from the listening position.
Note
•• To avoid magnetic interference or unwanted noise, never place this product too close to any radiation devices.
Connect speakers
Note
•• Make sure that the colors of the speaker wires and terminals are matched.
•• For optimal sound, use the supplied speakers only.
•• Connect only speakers with impedance that is the same or higher than the supplied speakers. Refer to the chapter "Specifications" in this manual.
1 Hold down the socket flap.
2 Insert the stripped part of the wire completely.
•Insert the right speaker wires to "R", left speaker wires to "L".
Connect power
Caution
•• Risk of product damage! Make sure that the power supply voltage corresponds to the voltage printed on the back or the underside of the product.
•• Risk of electric shock! When you unplug the AC power cord, always pull the plug from the socket. Never pull the cord.
•• Before you connect the AC power cord, make sure that you have completed all other connections.
Connect the power plug to the wall outlet.
Install/replace the remote control batteries
Caution
•• Risk of explosion! Keep batteries away from heat, sunshine, or fire. Never discard batteries in fire.
8EN
