4 Get started
Caution
•• Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in sequence.
Turn on
Press 
.
»»This product switches to the last selected source.
Switch modes
Automatically switch the modes:
•After this product stays inactive for 15 minutes, it automatically switches to the normal standby mode.
»»The clock is displayed.
»»If the clock is not set, | blinks. |
•After this product stays in the normal standby mode for 15 minutes, it automatically switches to the eco power standby mode.
»»
scrolls, and then the LCD screen lights off.
»»The LED indicator beside the LCD screen lights in red.
Manually switch the modes:
•Press and hold 
to switch this product
•from the working mode or normal standby mode to the eco power standby mode, or
•from the eco power standby mode to the normal standby mode.
•Press
to switch this product
•between the working mode and the normal standby mode, or
•from the eco power standby mode to the working mode.
Set the clock
Note
•• During setting, if no action is made within 90 seconds, the product exits clock setting without saving earlier operations.
1 In standby mode, press and hold CLOCK to enter the clock setting mode.
»»
or 
is displayed.
2 Press + VOL - or 
/ 
to select 
or 
, and then press CLOCK.
•
:
•
:
3 Press + VOL 
/ 
to set the hour, and then press CLOCK.
»»The minute digits begin to blink.
4 Press + VOL - or 
/ 
to set the minute, and then press CLOCK.
»»The set clock is displayed.
Tip
•• The product can synchronize its clock with a connected iPod/iPhone/iPad.
Select a source
On the product, press SOURCE repeatedly to select a source.
•
: the playlist on the
connected iPhone/iPod/iPad
• 
: the audio input through the AUDIO IN socket
8EN
