Philips DCM230 quick start Basic Functions

Basic Functions

English

iPod

TIMER

Important!

Before you operate the system, complete the preparation procedures.

Switching the system on

●Press STANDBY-ON/ECO POWER B (or

B on the remote).

➜The system will switch to the last selected source.

●Press SOURCE on the top of the system or CD, USB, iPod, TUNER or AUX on the remote control.

➜The system will switch to the selected source.

Switching the system to standby mode

●Press STANDBY-ON/ECO POWER B (or

B on the remote).

➜The backlight for clock display is dim in standby.

➜The volume level (up to a maximum volume level of 12), interactive sound settings, last selected mode (ECO Power Standby or normal standby), source and tuner presets will be retained in the player's memory.

Switching the system to Eco Power Standby mode

●Press and hold STANDBY-ON/ECO POWER B (or B on the remote) for more than 2 seconds.

➜ The backlight will go blank.

Power Saving Automatic Standby

As a power-saving feature, the system automatically switches to Eco Power/ Standby 15 minutes after a CD/MP3/WMA/USB playback has reached the end and no control is operated.

Adjusting volume and sound

1Press VOLUME +/- (or VOL +/- on the remote control) to decrease or increase the volume.

➜ Display shows the volume level VOL and a number from MIN 01, 02, ...31 MAX.

2Press DSC repeatedly to select the desired sound effect: ROCK/POP/JAZZ/CLASSIC.

3Press DBB to switch bass enhancement on or off.

➜If the DBB is activated, DBB ON is shown.

➜If the DBB is deactivated, DBB OFF is shown.

4Press MUTE on the remote control to interrupt sound reproduction instantly.

➜ Playback will continue without sound and -- MUTE-- will flash on the display.

●To activate sound reproduction you can:

–press MUTE again;

–adjust the volume controls;

–change source.

To listen through the headphone

●Connect the headphone plug to the n socket on the rear of the set.

➜ The speakers will be muted.

16