Philips DCM230 quick start CD/MP3-CD Operation, Loading a disc, Basic playback controls

CD/MP3-CD Operation

iPod

TIMER

Important!

The lens of the CD player should never be touched.

Loading a disc

This CD player plays Audio Discs including CD Recordables, CD-Rewritables and MP3 CD.

●CD-ROM, CD-I, CDV,VCD, DVD or computer CDs, however, are not possible.

●DRM-protected WMA disc is not supported.

1Press SOURCE on the top of the system to

select CD or press CD on the remote.

2Insert a disc into the disc loader..

➜Make sure the label side is facing up.

➜Make sure you have removed any other disc from the slot loader.

3Press ÉÅ to start playback.

4At any time, simply press 9 to stop playback.

Basic playback controls

To play a disc

●Press ÉÅ to start playback.

➜ The current track number and elapsed playing time of the track are displayed during disc playback.

To select a different track

●Press S/T (or ¡ / ™ on the remote control) once or repeatedly until the desired track number appears in the display.

●You can also use the Numerical Keypad (0~9) on the remote to select a track directly.

●If you have selected a track number shortly after

loading a disc or in the PAUSE position, you will need to press ÉÅ to start playback.

Text display during playback In CD mode

●Press DISPLAY repeatedly to see the following information.

➜Track number and elapsed playback time of current track.

➜Track number and total elapsed playback time.

➜Track number and remaining playback time of current track.

➜Track number and total remaining playback time.

➜Clock time.

In MP3-CD mode

●Press DISPLAY to display the ID-3 information if available and the clock time.

English

17