STANDARD CONNECTIONS
NTSC/PAL SETTING
INFRARED REMOTE CONTROL
Use the NTSC/PAL switch on the rear of the player to set the player menu according to the standard used by your TV set. To activate the new setting, the player needs to be switched off and on again.
NOTE
-The video output standard for video CD and
LOADING THE BATTERIES
1Open the battery compartment cover.
2Insert two ‘AAA’ (R03) batteries as indicated inside the bat- tery compartment.
3Close the cover.
HEADPHONES
To listen to the player sound directly through headphones, plug the headphone into the headphone jack on the front of the player. Adjust the volume as desired with the headphone volume control.
CONNECTING THE POWER SUPPLY
1Plug the feed end of the power cord supplied into the Power connector on the rear of the player.
2Plug the supply end of the cord into an AC outlet.
NOTE
-The player automatically adjusts to the local AC voltage.
-When the player is in the “OFF” position, it still consumes some power. If you wish to disconnect your player comple- tely from the power supply, pull the plug from the AC Outlet.
CAUTION
Only qualified service personnel should remove the cover or attempt to service this appliance.
CAUTION
Do not mix old and new batteries, and NEVER mix dif- ferent types of batteries (standard, alkaline, recharge- ables, etc.).
