Philips DVD615AT98 owner manual Video Output, Video Mode

34 Video Output, Video Mode

Video Output

If you used S-Video or Component Video connections as described on pages 11-12, set VIDEO OUTPUT to S-VIDEO or YPBPR (for Component Video) by following the steps below. You only need one video connection between the TV and the Player. You cannot use S-Video and Component Video at the same time.

If you used the yellow VIDEO (VIDEO OUT) jack on the Player to connect the Player to the TV, you do not need to adjust the VIDEO OUTPUT setting.

1 Press SYSTEM MENU.

	Press 9 repeatedly to select SETUP VIDEO OUTPUT, then
2 press OK.
3	Press 9 to select VIDEO OUTPUT, then press -.
	- - VIDEO OUTPUT PAGE - -

TV TYPE

VIDEO OUTPUT F S-VIDEO

TV DISPLAYYPBPR

VIDEO MODE

BRIGHTNESS

CONTRAST

SATURATION

MAIN PAGE

1,5

2-4

4 Press 9 or 8 to select S-VIDEO or YPBPR, then press OK. Choose S-VIDEO if you connected the Player’s S-VIDEO (VIDEO OUT) jack to the TV’s S-Video In jack as described on page 11. Choose YPBPR if you connected the Player’s Y Pb Pr (VIDEO OUT) jacks to your TV’s Component Video In jacks as described on page 12.

5 Press SYSTEM MENU to remove the menus.

Video Mode

Just as you can adjust your picture on your TV, you can adjust some pic- ture elements at the Player. Choose a picture setting that best displays the Disc you are playing.

1	Press SYSTEM MENU.		1
	Press 9 repeatedly to select SETUP VIDEO OUTPUT,
2 then press OK.
3	Press 9 repeatedly to select VIDEO MODE, then press -.
	- - VIDEO OUTPUT PAGE - -
	TV TYPE
	VIDEO OUTPUT
	TV DISPLAY		2-4
	VIDEO MODE	F BRIGHT
	BRIGHTNESS	STANDARD
	CONTRAST	SOFT
	SATURATION	PERSONAL

MAIN PAGE

4 Press 8 or 9 to select BRIGHT, STANDARD, SOFT, or PERSONAL, then press OK. Continue to step 5 on page 35.