Preparation
Inserting batteries into the
Remote Control
1Open the battery cover.
2Insert batteries with the correct polarity as indicated by the + and - symbols inside the
battery compar tment.
3Close the cover.
- | + |
+ | - |
CAUTION!
–Remove batteries if they are exhausted or not to be used for a long time.
–Do not use old and new or different types of batteries in combination.
–Batteries contain chemical substances, so they should be disposed off properly and kept away from children.
Using the Remote Control
●Direct the remote control at the remote sensor of the DVD player.
●Do not drop or give the remote control a shock.
●Do not leave the remote control near extremely hot or humid place.
●Do not spill water or put anything wet on the remote control.
NTSC/PAL Conversion
This player is equipped with a NTSC/PAL conversion feature to convert the video output of the disc to match your TV system.The conversions supported are as below:
| Disc | Output format | |||
Type |
| Format | Selected mode | ||
|
|
| NTSC | PAL | AUTO |
DVD |
| NTSC | NTSC | PAL | NTSC |
|
|
|
|
|
|
|
| PAL | NTSC | PAL | PAL |
|
|
|
|
|
|
VCD |
| NTSC | NTSC | PAL | NTSC |
|
|
|
|
|
|
|
| PAL | NTSC | PAL | PAL |
|
|
|
|
|
|
Notes:
–AUTO can only be selected when using a TV that has both the NTSC and PAL systems.
–Slight picture distortions may occur due to this conversion.This is normal.Thus, the AUTO format is most suitable for the best picture quality.
9
DVD616K IFU for /751 | 3141 016 18911 |
