Panasonic HX-A500 owner manual Power supply, Charging the battery

Models: HX-A500

1 40
Download 40 pages 25.3 Kb
Page 14
Image 14

Preparation

Power supply

Charging the battery

When this unit is purchased, the battery is not charged. Charge the battery fully before using this unit for the first time.

This unit has a built-in rechargeable lithium-ion battery. Do not remove except when disposing of this unit. (l 30)

The battery will not be charged if this unit is turned on. Connect it with the PC to charge the battery after turning it off.

It is recommended to charge the battery in a temperature between 10 oC and 30 oC (50 oF and 86 oF).



ALOCK switch

BUSB cable (supplied)

CUnlocked when the red indicator is visible

DTurn the side with the symbol up to connect the micro B end of the USB cable to the USB terminal of this unit.

1Slide the LOCK switch to the left to unlock the side cover and slide the side cover downward to open it.

2Connect the USB terminal of this unit to a PC with the USB cable (supplied).

Insert the USB cable securely all the way.

The Power lamp will flash red at an interval of 2 seconds (approximately 1 second on, 1 second off), indicating that charging has begun.

It will turn off when the charging is completed.

Do not use any other USB cables except the supplied one. (Operation is not guaranteed with any other USB cables.)

Do not heat or expose to flame.

Do not leave the unit (including built-in battery) in a car exposed to direct sunlight for a long period of time with doors and windows closed.

If operating time is short even after fully charging the battery, the battery is worn out and needs to be replaced. Please contact your dealer.

14

SQT0251 (ENG)

Page 14
Image 14
Panasonic HX-A500 owner manual Power supply, Charging the battery