Using remote operation with a direct connection ([Smartphone Direct Connect])
∫Preparations before using remote operation
1 Install the smartphone application “Image App” on your smartphone. (l 26)
2 Check if the smartphone is an Android
≥If your smartphone is
∫If the device is Android (NFC-compatible)
≥Set the NFC function of the smartphone to on.
1
2
Start up the smartphone application “Image App”.
Touch the smartphone on 
of this unit.
≥Touch the NFC mark while a message asking you to touch the NFC mark on the device is displayed on the smartphone screen.
≥ If this is the first time the smartphone is connecting to this unit, the
message is displayed on the screen of this unit. Select [YES], press
the joystick, and then touch the smartphone on 
of this unit again.
≥If the unit is not recognized even when touching the smartphone, change positions and try again.
≥You cannot set up a connection when recording an image with this unit or the menu screen is displayed.
≥When the connection is complete, images of this unit is displayed on the smartphone screen.
∫If the device is Android (non-NFC-compatible) or iOS
≥This operation is not possible while this unit is recording.
1 Press the joystick to select the menu.
2 Select the [Smartphone Direct Connect], press the joystick, then start up the [Smartphone Direct Connect].
≥A 
) will be displayed on the screen.
3 On the smartphone, select the SSID displayed on this unit from the
4 Enter the Password displayed on this unit’s screen on the smartphone.
Confirming that the
j 
is displayed on the screen
5 Start up the smartphone application “Image App”.
≥When the connection is complete, images of this unit is displayed on the smartphone screen.
27
(ENG) SQT0251
