Philips DVD726v2 owner manual Connecting to a TV Only TV has an S-Video In Jack

Plug the power cords of the DVD Player and the TV into an active power outlet. Press STANDBY-ONy on the front of the DVD Player to turn it on.

Connect an S-Video cable (not supplied) to the S-VIDEO (VIDEO OUT) jack of the DVD Player and to the TV’s S-VIDEO In jack.

12 Hookups (cont’d)

Connecting to a TV Only

TV has an S-Video In Jack

	Back of TV	2
	(example only)
1		RIGHT AUDIO IN
		LEFT AUDIO IN
		S-VIDEO IN

3

1

2 Connect the supplied audio cable to the red and white AUDIO OUT (left and right) jacks on the DVD Player and to the left/right AUDIO IN jacks on the TV. The supplied audio cable has red and white markings. Match the cable colors to the jack colors.

3

4 Turn on the TV. Set it to the correct S-Video In channel. See

your TV owner’s manual for details. Or, go to your lowest TV channel (01 or 02) and change channels downward until you see the DVD screen on the TV.

Helpful Hints

•On the TV, the S-Video In jack may be labeled Y/C, S-Video, or S-VHS (super video).

•If your TV has a single Audio In jack instead of separate left/right Audio In jacks, you will need a different audio cable. You need a “splitter” audio cable to go from the left/right AUDIO OUT jacks of the DVD Player to the single Audio In jack on your TV. See your electronics retailer for details.