Y
Pb
Pr
1 Connect an S-Video cable (not supplied) to the S-VIDEO (VIDEO OUT) jack of the DVD Player and to the TV’s S- VIDEO In jack.
2 Connect the supplied audio cable to one pair of the red and white AUDIO OUT (left and right) jacks on the DVD Player and to the left/right AUDIO IN jacks on the TV. Match the cable colors to the jack colors.
3 Connect the supplied AC power cord to the MAINS jack on the rear of the DVD Player.
4 Plug the power cords of the DVD Player and the TV into an active power outlet. Press the POWER ON/OFF button on the front of the DVD Player to turn on the DVD Player.
5 Turn on the TV power. Set the TV to the correct S-Video In channel. Such channels usually are near channel 00. See your TV owner’s manual for details. Or, change channels at the TV until you see the DVD screen saver on the TV.
Hookups (cont’d) 11
Connecting to a TV Only
TV has an S-Video In Jack
2 |
| Back of TV |
| (example only) | |
|
| 3 |
| RIGHT AUDIO IN | 1 |
| LEFT AUDIO IN | |
| ||
Helpful Hints
• On the TV, the
• Set VIDEO OUTPUT to
