Y
PB
Pr
1 Connect the supplied video cable to the yellow VIDEO (VIDEO OUT) jack of the DVD Player and to the TV’s VIDEO IN jack.
2 Connect the supplied audio cable to one set of the red and white AUDIO OUT (left and right) jacks on the DVD Player and to the left/right AUDIO IN jacks on the Stereo. Match the cable colors to the jack colors.
3 Connect the supplied AC power cord to the MAINS jack on the rear of the DVD Player. Plug the power cords of the DVD Player, Stereo, and TV into an active power outlet. Press the POWER ON/OFF button on the front of the DVD Player to turn on the DVD Player.
4 Turn on the Stereo power and set your Stereo to the cor- rect Audio In channel or sound source. Refer to the Stereo owner’s manual for details.
5 Turn on the TV power. Set the TV to the correct Video In channel. Such channels usually are near channel 00. See your TV owner’s manual for details. Or, change channels at the TV until you see the DVD screen saver on the TV.
Hookups (cont’d) 13
Connecting to a TV and a
(Stereo has Dolby Pro Logic or right/left Audio In jacks)
2 Stereo (example only)
RIGHT AUDIO IN
LEFT AUDIO IN
Back of TV
(example only)
3
VIDEO IN
1
Helpful Hint
•If you prefer or need to use the DVD Player’s
