Functional Overview
E n g l i s h
Front and Rear Panels
–To switch the DVD Player to Standby mode or ON
Disc tray
OPEN/CLOSE /
–Open/Close the disc tray
ON LED
–LED lights up when the power is on
PLAY LED
–LED lights up during playback
T NEXT
– To select next chapter or track
IR Sensor
–Point the remote control towards this sensor
9 STOP
– To stop playback
2; PLAY
– To start or interrupt playback
PREV S
– To select previous chapter or track
LEVEL |
– Microphone volume control
MIC
– For connecting microphone
Mains (AC Power Cord)
–Connect to a standard AC outlet
CVBS (VIDEO Out)
–Connect to CVBS Video input of a TV
YPbPr (Component Video Out)
– Connect to YPbPr input of a TV
Audio Out (Left/Right)
–Connect to AUDIO inputs of an amplifier, receiver or stereo system
COAXIAL (Digital audio out)
–Connect to coaxial AUDIO input of a digital audio equipment
Caution: Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit.
10
10 | 8239 300 34232 | |
09/05/05, 2:11 PM |
