|
| Troubleshooting |
|
|
|
Problem | Solution | |
Disc can’t be played | – | The |
| – | Ensure the disc label is facing up. |
| – | Check if the disc is defective by trying another disc. |
| – | Region code incorrect. |
Picture freezes momentarily | – | Check the disc for fingerprints/scratches and |
during playback |
| clean with a soft cloth wiping from centre to edge. |
No return to | – | Reset the unit by switching the player off, then on |
disc is removed |
| again. |
The player does not respond to | – | Aim the Remote Control directly at the sensor |
the Remote Control |
| on the front of the player. |
| – | Reduce the distance to the player. |
| – | Replace the batteries in the Remote Control. |
| – | |
|
| signs) as indicated. |
Buttons do not work | – | To completely reset the player, unplug the AC |
|
| cord from the AC outlet for |
Player does not respond to some | – | Operations may not be permitted by the disc. |
operating commands during playback. |
| Refer to the instructions of the disc jacket. |
DVD Player cannot read | – | Use a commonly available cleaning CD/DVD to |
CDs/DVDs |
| clean the lens before sending the DVD Player for |
|
| repair. |
Menu items cannot be selected | – | Press STOP twice before selecting System Menu. |
| – Depending on the disc availability, some menu items | |
|
| cannot be selected. |
Unable to select Progressive Scan on/off | – | Check that the output of the video signal is switch to |
|
| ‘YUV’. |
|
|
|
E n g l i s h
Visit us at www.philips.com/support for service support
35
