Philips DVP5160 user manual Before you start, To deactivate Progressive Scan manually

Getting Started (continued)

Step 3 : Setting up Progressive Scan feature

(for Progressive Scan TV only)

The progressive scan displays twice the number of frames per seconds than interlaced scanning (ordinary normal TV system). With nearly double the number of lines, progressive scan offers higher picture resolution and quality.

Before you start...

–Ensure that you have connected this DVD player to a progressive scan TV using the YPbPr connection (see page 11).

–Ensure that you have completed the basic installation and setup.

ATurn on your TV and set to interlace mode (refer to your TV user manual).

BPress STANDBY-ON 2 on the remote control to turn on the DVD player.

CSelect the correct video-in channel.

The DVD background menu appears.

HSelect { On }, then press OK to confirm. The menu will appear on the TV.

ACTIVATING PROGRESSIVE SCAN:

1.ENSURE YOUR TV HAS PROGRESSIVE SCAN. 2.CONNECT USING YPBPR(GBR) VIDEO CABLE. 3.IF THERE IS A DISTORTED PICTURE,

WAIT 15 SECONDS FOR AUTO RECOVERY.

OK CANCEL

IPress W to highlight { OK } and press OK to confirm.

JTurn on your TV progressive scan mode (refer to your TV user manual).

The menu will appear on the TV.

CONFIRM AGAIN TO USE PROGRESSIVE

SCAN. IF PICTURE IS GOOD,

PRESS OK BUTTON ON REMOTE.

OK CANCEL

KPress W to highlight { OK } and press OK to confirm.

The setup is now completed and you can start enjoy the high quality picture.

To deactivate Progressive Scan manually:

English

D Press SETUP.	Wait for 15 seconds for the auto
E Press X to select { Video Setup Page }.	recovery.
	OR

Video Setup Page

TV Type
TV Display
Progressive	On
Picture Setting	Off
Component

FSelect { Component } to { Interlaced }, then OK to confirm.

GPress S T repeatedly to select { Progressive }, then press X.

APress OPEN/CLOSE ç on the DVD player to open the disc tray.

BPress numeric keypad ‘1’ on the remote control for few seconds.

The DVD background screen appears.

Tip:

– There are some progressive scan TVs and High-Defi nition TVs that are not fully compatible with this unit, resulting in the unnatural picture when playing back a DVD VIDEO disc in the progressive scan mode. In such a case, turn off the progressive scan feature on both the DVD player and your TV.

TIPS: The underlined option is the factory default setting.

Press W to go back to previous menu item. Press SETUP to exit the menu item.

19

01-51_dvp5160_12_eng2.indd 19 2007-03-30 4:07:08 PM