Philips DVP5992/F7E Analog Output, Lt/Rt, Stereo, Surr, Digital Audio Setup, Digital Output, All

Setup Menu Options (continued)

Audio Setup Page (underlined options are the factory default settings)

Analog Output	This setting is only required if you have connected the audio
	output of this unit to a stereo device or TV using the analog
	output jack.
	{ LT/RT }	– The connected device has a built-in
		Dolby Pro Logic decoder. It can deliver
		the surround sound through the two
	{ Stereo }	speakers.
		– The connected device can only output
	{ V SURR }	stereo audio through two speakers.
		– For virtual surround sound effects.
	This setting is only required if you have connected the audio
Digital Audio Setup
	output of this unit to an amplifier/receiver using the digital
	output jack.
	{ Digital Output }	– { Off }

Disable digital audio output. Select this if you are using the analog audio jacks to connect this unit to a TV or Stereo system.

{ All }

The connected device supports multi- channel audio formats. The digital audio format will be output as on disc.

{ PCM Only }

The connected device does not support multi-channel formats. All audio signals are downmixed to PCM format (2-channel).

:c\a^h]

39