19
There is a wide range of audio and video devices that can be connected to your TV.The following
connection diagrams show you how to connect them to the TV.
AV1 can handle YPbPr,Y/C and CVBS; AV2 YPbPr (RGB), CVBS and Y/C;HDMI (AV3) ;Side: CVBS and Y/C.
AV2
R
L
V
H
Y/G
CVBS S-VIDEO
Pr/R
Pb/B
75
ANT IN
CABLE
RECORDER
OUT IN
OUT
3
5 6
RECORDER
MONITOR
OUT
AV1AV2
S-VIDEO
S-VIDEO
R
L
Pr
Pb
Pr/R
Pb/B
V
H
Y/G Y
VIDEO
R
L CVBS
R
L
3
2
75
ANT IN
1
CABLE
4
OUT IN OUT IN
&Connect the RF Antenna or Cable TV cable (eventually
via an optional two-way signal splitter and/or Cable TV
converter box) 1to the RF IN socket of your
recorder.
éConnect another RF cable 2from the output OUT of
your recorder to the TV’s input 75 øxjack.
“Better playback quality can be obtained if you also
connect the Video,Audio Left and Right (only for stereo
devices) AV cables 3to the CVBS,AUDIO L and R
input jacks of AV2.
If your recorder has an S-VHS video jack:
For improved picture quality,connect an S-video cable
with the S-VIDEO input instead of connecting the
recorder to the CVBS jack of AV2.
S-Video does not provide audio,so audio cables must
still be connected to provide sound.
&Connect the RF antenna cable 1of the RF IN socket
of your other AV device.
éConnect the RF output of the AV device to the RF input
of the recorder 2.
“Connect another RF cable 4from the output OUT of
your recorder to the TV’s input 75 Ohm xjack.
‘To obtain better quality, also connect the Video or
S-Video,Audio left and Audio right cables of both devices
to AV1 (Yor S-VIDEO,AUDIO L and R,) 3and to AV 2
(CVBS or S-VIDEO,AUDIO L and R) 5.
Notes:
- In case of mono equipment, only the left loudspeaker
reproduces sound. Use a mono to stereo adapter (not
supplied) for sound reproduction via all internal
loudspeakers.
- When using the S-VIDEO connector do not connect any
device to the AV2 CVBS or AV1 Y input.
AUDIO
RECEIVER
MONITOR
OUT
AV1 AV3AV2
R
L
V
H
S-VIDEO
S-VIDEO
Y/G
CVBS
Pr/R
Pb/B
R
L
Pr
Pb
Y
VIDEO
R
L
R
L
CENTRE
SUBW.
R
L
HDMI
75
ANT IN
The MONITOR OUT connector can be used for a daisy chaining or to record programs from your TV
6. Only when a recorder is connected to MONITOR OUT it is possible to record a program from your
TV. See Record with your recorder,p. 24.
Recorder and other A/V devices
Recorder (VCR-DVD+RW)
Note: Do not place your recorder too close to the screen as some recorders may be susceptible for signals from the
display.Keep a minimum distance of 20” from the screen.
Connect Accessory Devices