| TV |
|
| VCR 1 | TUNER |
w VCR 2 | TAPE | |
| DVD | SAT |
M | AMP | CD |
TV |
| B |
ZOOM | π | OK |
| π | π |
B
A
Preparation
&Place the receiver box wherever you want, but leave at least 5 cm space free all around the box for ventilation and do not cover the ventilation openings, (e.g. on the ground, in a cupboard, behind a wall, in another room....).
To prevent any unsafe situations, do not place any objects on top of the monitor or the receiver. No naked flame sources, such as lighted candles, shoud be placed on or in the vicinity. Avoid heat, direct sunlight and exposure to rain or water.The equipment shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on it.
éConnect the supplied aerial cable 1 and the VGA cable with trailing audio cinch connectors 2 as shown in the inside frontcover of this handbook. Make sure all screws of the cable 2 are tightened well.
“To connect your computer, see p. 22. To connect other peripherals, see p. 20.
In order to obtain the best result, please use only the supplied antenna cables between the receiver box and videorecorder, and between videorecorder and antenna connector.
‘Insert the mains cord supplied 3 (with filter) into the MAINS INLET at the back of the monitor and the mains cord 4 at the back of the receiver. Put
both in the wall sockets.
Please, only use the mains cord 3 (with filter) supplied with the monitor, for the monitor and the mains cord 4 supplied with the receiver, only for the receiver.
(Remote control: Remove the cover of the battery compartment. Insert the 2 batteries supplied (Type
Press the TV key next to the display to be sure your remote control is in the TV mode.
RO3 / AAA
The batteries supplied do not contain the heavy metals mercury and cadmium. Nevertheless in many countries batteries may not be disposed of with your household waste. Please check on how to dispose of batteries according to local regulations.
§Switch the TV on : Press the power button A at the right side of the monitor and the one on the front of the receiver box.
A green indicator lights up and the screen comes on.
If the indicator is red, press the - P+ key on the remote control.
The green indicator blinks every time you press a key on the remote control.
When you switch on your set for the first time, the menu LANGUAGE automatically appears on the screen. The explanation appears in different languages one at a time.
