9Installation
Tel e text level 2.5
Some broadcasters offer the opportunity to see more colours,other
background colours and nicer pictures in the teletext pages.
&Select Teletext level 2.5with the cursor down.
éPress the cursor right to select Teletext level 2.5 On to take advantage of
this feature.
“Press the cursor right again to select Teletext level 2.5 Off if you like the
more neutral teletext layout.
The selection made is valid for all channels which broadcast teletext.
Note: It may take a few seconds before teletext broadcast switches over to
Teletext level 2.5.
Centre mode
When you have connected a multi channel audio receiver to the receiver box
(see Connect peripheral equipment, p.26) and you have selected Centre
mode On,the loudspeakers of the monitor will act as centre speaker,making
a separate centre speaker unnecessary.
Source
This menu allows you to select the peripheral you connected to one of the
external inputs.
&Select Source with the cursor right.
éPress the cursor down to select one of the external inputs.
“Press the cursor right to enter the list of types of peripherals attached to the
selected input.
‘Select the peripheral device with the cursor up/down.
Once you have selected the source,e.g. VCR,this source will automatically be
selected when your remote control is in VCR mode, see p.10, and you press
the wkey on the remote control.
Decoder
If a decoder or a descrambler is connected, see p.24, you can define one or
more programme numbers as decoder programme numbers.
&Select Decoder with the cursor right.
éSelect Programme with the cursor down.
“Select the programme number under which you have stored the programme
coming from your decoder.
‘Select Status.
•Select the input used to connect your decoder: None,EXT1,EXT2.
•Select None if you do not want the selected programme number being
activated as a decoder programme number.
General
Teletext level 2.5
Setup
On / Off
On / Off
General
Centre mode
Setup
Source
EXT1
EXT2
EXT3
EXT4
EXT5
Front
Setup
1003.5 en 04-03-2003 09:13 Pagina 9