Philips FW-D5D manual Selecting the Source, Dim mode, Volume Control, Sound Control, English

OPERATING THE SYSTEM

English

16

Switching the system to power save mode (when the

Demonstration is stopped)

•Press POWER SAVE to switch to energy saving mode ( < 2 watts ).

™"LOW POWER STANDBY ON" will be displayed, after which the display screen goes blank.

™The low power STANDBY ON LED will be lit.

Note:

–if the demonstration mode has not been disabled, it will resume five seconds later.

Selecting the Source

•Press the desired source selection button: DVD, CD, TUNER or AUX.

™The display indicates the selected source.

Note:

–For an external source, make sure you have connected the audio left and right OUT terminals of the external equipment (TV, VCR, Laser Disc player, DVD player or CD Recorder) to the AUX/CDR IN terminals.

Dim mode

You can select the desired brightness for the display.

•Press DIM to select DIM 1, DIM 2, DIM 3 or DIM OFF display mode.

™The DIM appears on the display.

™"DIM 1", "DIM 2", "DIM 3" or "DIM OFF" will be displayed depending on the mode selected.

DIM OFF - normal brightness with Spectrum Analyzer On

FTS	TITLE		CHAP.	FM LW A M W	SLEEP DIM	TIMER
P1	P2	P3		P4	P5	P6

DIM 1 - normal brightness with Spectrum Analyzer Off

FTS	TITLE		CHAP.	FM LW A M W	SLEEP DIM	TIMER
P1	P2	P3		P4	P5	P6

DIM 2 - half brightness with Spectrum Analyzer On

FTS	TITLE		CHAP.	FM LW A M W	SLEEP DIM	TIMER
P1	P2	P3		P4	P5	P6

DIM 3 - half brightness with Spectrum Analyzer Off and all LEDs on the system will be switched off.

FTS	TITLE		CHAP.	FM LW A M W	SLEEP DIM	TIMER
P1	P2	P3		P4	P5	P6

Volume Control

Adjust VOLUME to increase or decrease the sound level.

For Personal Listening

Connect the headphones plug to the n socket at the front of the system. The speakers will be muted.

MUTE (on remote control only)

This feature allows you to temporarily switch off the sound without switching off the system when you require a moment of silence.

1Press MUTE on the remote control to switch off the sound.

™ "MUTE" will be displayed.

2Press MUTE again on the remote control or increase the VOLUME level to switch on the sound.

Sound Control

For Optimal sound listening, you can only select one of the following sound controls at a time :VEC, PERSONAL or DSC.

VIRTUAL ENVIRONMENT

CONTROL (VEC)

The VEC feature enables you to adjust the system to select a type of environment.

1Press to select the VEC feature.

2Adjust the JOG to select the desired VEC setting : HALL, CLUB, DISCO, CINEMA, CONCERT or ARCADE.

™The selected environment is encircled.

™"HALL, CLUB, DISCO, CINEMA, CONCERT or ARCADE" will be displayed.

PERSONAL SOUND

You can store up to 6 personal settings.

1Press to select the PERSONAL feature.

2Adjust the JOG to select the desired Personal setting.

™The selected personal setting number will appear on the display.

™If no name has been stored previously, "PERSONAL X" will be displayed. "X" is the setting number.

pg 01-43/D5/37-Eng 16 7/13/00, 11:50 AM 3139 116 19774