11 | DOLBY PRO LOGIC |
7 Adjust the sound |
|
of all the speakers | USE TEST TONE |
until they are equal. | • |
When you are | LUME |
satisfied with the | ƒ |
setting, press |
|
TEST TONE again to switch off the test signal.
Note:
–It is advisable to set the speakers’ level at normal listening level. "XX" denotes the sound level.
When you have completed the Dolby Pro Logic setup, you are ready to enjoy Home Cinema sound.
•Press DPL (PRO
LOGIC)‚
repeatedly to | ‡ | |
select and cycle | DPL |
|
through the | L BALANCE | R |
various sound |
|
|
modes. |
|
|
Dolby Surround ª Center
Phantom ª Dolby 3 Stereo ª
Stereo ª Dolby Surround …
Dolby Surround
This setting is for a full Dolby Surround Pro Logic mode.
• Press DPL to select the Dolby
Surround mode. |
|
| |
ª The message |
|
| |
“DOLBY |
| C | |
SURROUND” | L | R | |
will be | |||
| PRO LOGIC | ||
displayed. | S | S | |
|
|
ªThe DPL display panel will light up.
Dolby Center Phantom
This setting is for use without the center speaker. It redistributes the center speaker sound to the left and right speakers, providing conventional stereo across the front.
•Press DPL to select the Dolby Pro Logic Center Phantom mode.
ª The message
“CENTER C
PHANTOM” | L | R |
will be |
| PRO LOGIC |
Dolby 3 Stereo
Use this setting when full surround is not required, but a wide stereo sound is desired. It only requires the left, right and center speakers.
•Press DPL to select the Dolby 3 Stereo mode.
ª The message
“DOLBY 3 |
| C |
STEREO” will L | R | |
be displayed. |
| PRO LOGIC |
ª The DPL | S | S |
|
|
display panel will light up.
Normal Stereo
This setting is for normal stereo sound without Dolby Pro Logic. It only requires the left and right speakers.
•Press DPL to select the Stereo mode.
ªThe message
“STEREO”C
will be | L | R | |
displayed. |
| PRO LOGIC | |
S | S | ||
ª The DPL | |||
|
|
Important!
1For the best Dolby Pro Logic sound, switch on DPL with DSC set to “Classic”.
2Dolby Pro Logic mode will automatically switch to normal Stereo mode when headphones are connected.
3Switch to normal stereo mode when you record on a tape.
ª The Dolby Pro Logic display panel |
displayed.
SS
display panel |
will light up with the selection. |
ªThe DPL display panel will light up.
will light up. |
3139 116 19511 ( ENG)