15 | OPERATING THE SYSTEM |
|
To start the demonstration mode
•Press and hold ‚(on the system only) for five seconds when the system is in standby mode.
ª The demonstration will begin.
Easy Set
EASY SET allows you to store all available radio stations automatically.
•Press and hold STANDBY ON (on the system only) for five seconds when the system is in standby or demonstration mode.
ª“EASY SET” will be displayed, and followed by “TUNER” and then “AUTO”.
ªEASY SET will start searching for all radio stations on FM band and then followed by radio stations on AM band.
ªAll available radio stations with sufficient signal strength will be stored. Up to 40 presets may be stored.
Notes:
–EASY SET will start with the FM band, if there are still presets available, the system will continue to store the AM band.
–When EASY SET is used, all previously stored radio stations will be replaced.
–The last preset radio station will appear on the display when EASY SET is completed.
Switching the system ON
•Press CD, TUNER, TAPE or AUX.
You can also switch on the system by pressing any one of the CD DIRECT PLAY buttons.
Switching the system to standby mode
•Press STANDBY ON or B on the remote control.
ªThe system will switch to standby mode.
Selecting the Source
•Press the respective source selection button: CD, TUNER, TAPE or AUX.
ªThe display indicates the selected source.
Note:
–For an external source, make sure you have connected the audio left and right OUT terminals of the external equipment (TV,VCR, Laser Disc player, DVD player or CD Recorder) to the AUX IN terminals.
Selecting the Equalizer Display
You can select the desired equalizer display for the system.You must not press the DSC button on the system before using the SOUND 3 or 4 controls.
•Press the SOUND 3 or 4 to select the desired Equalizer Display, NORMAL,TOP DOWN, or NITE MODE.
ªThe selected display will be shown.
NORMAL Display
PROGRAM |
| STEREO |
REPEAT TIMER REC |
| BACK |
NEWS T.A. AM MW FMLW |
| FRONT HSD |
60Hz 250Hz 500Hz | 1KHz | 2KHz 4KHz 8KHz |
TOP DOWN Display
PROGRAM |
| STEREO |
REPEAT TIMER REC |
| BACK |
NEWS T.A. AM MW FMLW |
| FRONT HSD |
60Hz 250Hz 500Hz | 1KHz | 2KHz 4KHz 8KHz |
NITE MODE Display
PROGRAM |
| STEREO |
REPEAT TIMER REC |
| BACK |
NEWS T.A. AM MW FMLW |
| FRONT HSD |
60Hz 250Hz 500Hz | 1KHz | 2KHz 4KHz 8KHz |
Note:
–In NITE MODE, all lights will be switched off and the display brightness will be dimmed.
Sound Control
VOLUME ADJUSTMENT Adjust VOLUME to increase or decrease the sound level.
For Personal Listening
Connect the headphones plug to the
nsocket at the front of the system. The speakers will be muted.
DIGITAL SOUND CONTROL (DSC)
The DSC feature enables you to adjust the system to suit your type of music.
•Press DIGITAL SOUND CONTROL (DSC) to select
OPTIMAL, CLASSIC,TECHNO, JAZZ, ROCK or VOCAL.
ªThe selected digital sound is encircled.
ª“OPTIMAL X, CLASSIC, TECHNO X, JAZZ X, ROCK X or VOCAL X” will be displayed. "X" is the
3139 116 19511 ( ENG)
