Philips FW-V220/21 CD / VCD / MP3-CD, Loading a Disc, Disc Direct Play, Playing a normal disc

	CD / VCD / MP3-CD
En	Note:
	– For mixed mode discs, only one mode will be
gli	selected for playback depending on the recording
sh	format.

Loading a Disc

1Press VCD to select VCD/CD mode.

2Press OPEN•CLOSE.

➜ The disc changer tray slides out.

3Load a disc with the printed side up in the right

tray.

¶You can load another disc in the left tray.

¶To load the third disc, press the DISC

CHANGE button.

➜The disc changer tray will rotate until the empty tray is ready for loading.

4Press OPEN•CLOSE to close the disc changer tray.

➜The total number of tracks and the playing time of the selected disc appear on the display.

For MP3-CD only:

➜The first Album and the first Title information appear on the display.

Note:

–To ensure good system performance, wait until the disc changer completely reads the disc(s) before proceeding.

–For MP3-CD, the disc reading time may exceed 10 seconds due to the large number of songs compiled into one disc.

Disc Direct Play

¶To start playback from a selected disc tray, press DISC 1, DISC 2 or DISC 3 button.

➜ All the available discs will play once, then stop.

16

pg 01-032/V220/21-Eng 16

Playing a normal disc

For normal VCD:

Ensure that the system is switched to the corresponding PAL or NTSC system of your TV set (except multi-system TV).

1Press PLAYÉÅto start playback.

➜All the available discs will play once, then stop.

➜The disc tray, track number and elapsed playing time of the current track appear on the

display.

¶To interrupt playback, press PAUSEÉÅ.

➜The playing time flashes.

¶To resume playback, press PLAYÉÅ again.

2 To stop playback, press Ç.

Note:

–During Disc Reading mode, if you press any button, "PLEASE WAIT" will be displayed.

Disc Change

You can change the outer two discs while the third inner disc is stopped or is playing.

1Press DISC CHANGE.

➜The disc changer tray slides out.

2Replace the discs in the left and right disc trays. ¶ If you wish to change the inner disc during

playback, press DISC CHANGE again.

➜"CHANGING DISC" will be displayed.

➜The disc will stop playing.

➜The disc changer tray will close to retrieve the inner disc and then open again with the inner disc accessible.

3Press OPEN•CLOSE to close the disc changer tray.

Selecting a desired track

Selecting a desired track when playback is stopped

¶Press digit 0 – 9 on the remote control to select the desired track.

➜Playback will start immediately for the selected track.

➜The selected track number and elapsed playing time appear on the display.

Note:

–Maximum track selection from digital keys on remote control is 199 for MP3-CD and 99 for

3139 115 20823

28/05/2001, 09:03 AM