Recording
Dubbing tapes (from tape deck 1 to tape deck 2)
1Press TAPE ( TAPE 1•2 ) to select tape deck 2.
2Load the prerecorded tape into tape deck 1 and a blank tape into tape deck 2 with full spool to the left.
3Press DUBBING.
➜"DUB" with "2" scrolling right will be displayed. ¶ Dubbing will start immediately.
➜The REC starts flashing.
4Press Ç to stop dubbing.
Notes:
– At the end of side A, flip the tapes to side B and repeat the procedure.
– Dubbing of tapes is only possible from tape deck 1 to tape deck 2.
– To ensure good dubbing, use tapes of the same length.
– You can switch to other source while dubbing.
Recording from other sources
(only on tape deck 2)
1Load a blank tape into tape deck 2 with the open side downward.
2Press VCD, TUNER or AUX.
¶Start playback of the selected source.
3Press RECORD to start recording. ➜ The REC starts flashing.
4Press Ç to stop recording.
Notes:
– During recording, it is not possible to listen to another source.
VCD/CD Synchro Start
Recording
1Load a blank tape into tape deck 2 and a disc into a disc tray.
2Press VCD to select VCD/CD mode.
¶You can programme the tracks in the order you want them to be recorded (see Programming Tracks). If not, select the disc by pressing VCD (CD 1•2•3) and the tracks are recorded
according to the order on the selected disc.
3Press RECORD to start recording. ➜ The REC flag starts flashing.
¶Disc will start playback automatically.
4 Press Ç to stop recording.
E n g l i s h
Karaoke
Microphone Mixing
1Set the MIC LEVEL control to the minimum level to prevent acoustic feedback (e.g. a loud howling sound) before you connect the microphone.
2Connect a microphone to the MICROPHONE socket.
3Press VCD, TUNER, TAPE or AUX.
4Play the selected source.
5Adjust the volume level with VOLUME control.
6Adjust the MIC LEVEL control to the mixing level that you want.
7Start singing or talking through the microphone.
Note:
– Keep the mic away from the speakers to prevent howling
MICROPHONE - LEVEL
|
| 27 |
pg | 27 | 3139 115 20823 |
28/05/2001, 09:03 AM |
