Philips FW-V220/21 manual Troubleshooting, General, button is pressed, No or poor sound

	Troubleshooting
Eng	GENERAL
	System does not react when any
lis	button is pressed.
h
	No or poor sound.

Reversed left and right sound.

Lack of bass sound or apparently imprecise physical location of musical instruments.

Remote control has no effect on the system.

Timer is not working.

Clock setting is erased.

System displays features automatically;buttons flash continuously.

All lighted buttons are not lit.

32

pg 01-032/V220/21-Eng 32

–Press STANDBY-ON to switch the system off. Remove the AC power plug from the wall outlet, then reconnect the power plug and switch on the system again.

–Adjust the volume.

–Disconnect the headphones.

–Check that the speakers are connected correctly.

–Check if the stripped speaker wire is clamped.

–Make sure the MP3-CD was recorded within 32-256 kbps bit rate with sampling frequencies at 48 kHz, 44.1 kHz or 32 kHz.

–Check the speaker connections and location.

–Check the speaker connection for proper phasing, coloured/black wires to coloured/ black terminals.

–Select the source (VCD,TUNER, etc.)

before pressing the function button (É,í,ë, etc.).

–Reduce the distance to the system.

–Insert the batteries with their polarities (+/- signs) as indicated.

–Replace the batteries.

–Set the clock.

–Press CLOCK•TIMER to switch on the timer.

–If recording is in progress, stop recording.

–Reset the clock.

–Press and hold Ç (on the system) for

five seconds to switch off the demonstration.

–Press DIM until DIM OFF display mode is shown.

3139 115 20823

28/05/2001, 09:03 AM